亚博手机客户端

Order hotline: 0514-86274960
search
product Exhibition

current Location: Yangzhou Yuanfeng test Machinery Factory > Product Center > Rubber testing instrument > Open mill >Rubber mixing machine products, yf-8019

  • Product Name: Rubber mixing machine products, yf-8019
  • Product price: ¥0
  • Product origin: Chinese Mainland
  • Number of visits: one thousand three hundred and seventy Release time: 2015/4/13 16:35:14
  • Introduction content: The rubber mixing machine is specially used for rubber industry and plastic products blending and batching experiment machine. It has the characteristics of light weight, small volume, simple structure, convenient operation, low power consumption, convenient operation and maintenance.
  • I want to make an inquiry
detailed content

Rubber mixing machine products, yf-8019

Application of rubber mixing machine
This machine is specially used for rubber industry and plastic products blending and batching experiment machine. It has the characteristics of light weight, small volume, simple structure, convenient operation, low power consumption, convenient operation and maintenance.

Main technical parameters of rubber mixing machine
1. Roller diameter φ 160mm
2. Roller working face length: 320mm
3. The adjustment distance between rollers is 0-5mm
4. Roller speed ratio: 1:1.35
5. Rear roll speed: 9.80 M / min
6. Front roll speed: 8.03 M / min
7. 1-2kg at a time
8. Reducer model: bw0220-23-5.5kw
9. Overall dimension (length × width × height) 1350 × 770 × 1350mm
10. The total weight is about 1t
11. Temperature - room temperature - 165 ℃

Main structure of rubber mixer
It is composed of the main engine, the main engine, the electric heating device and the brake. The motor is directly connected to the reducer. The small sprocket of the reducer shaft drives the large sprocket on the rear roller. The speed ratio gear at the other end of the rear axle cylinder drives the speed ratio gear on the front roller. The front and rear rollers rotate in the opposite direction.
In order to ensure the safety of operation, this machine is equipped with emergency pull rod and adopts reverse braking mode to brake, which is safe and reliable.

Installation and commissioning of rubber mixing machine
1. During installation, the vertical and horizontal diagonal lines on the plane of the box body shall be calibrated with a level gauge, and the pipeline and electrical circuit shall be connected according to the specific situation of the user.
2. Check whether the protective cover of the reducer is loose and whether the lubricating points have been added with lubricant. During the first test run, the roller bearing bearing should be lubricated with oil. After the heavy load test run is normal, the grease should be used.
3. Set the temperature control instrument according to the temperature required for sample mixing (see attached table)
4、? Test whether the emergency stop switch is sensitive before starting. If it fails, it is forbidden to use the equipment.

Rubber mixing machine maintenance
1. The service life of the machine is closely related to the daily maintenance, especially the lubrication is more important. Please refer to table 1 for the lubrication points of the machine
2. According to the condition of the sprocket, the main parts of the gear should be replaced and repaired regularly.
3. Loading must not be excessive, such as excessive transfer, it will inevitably lead to overload operation of various mechanisms of the machine, and the result will damage some parts, even the main parts
Table 1
Lubrication part
Lubrication mode
Brand of lubricating oil
cycle
Roller bearing
Rotary cap dry oil cup
Gb491-65 calcium base grease
Every four hours
Sprocket size
Oil immersed
Sy1103-77 gear oil
HL-20 for winter and HL-30 for summer
Every six months
Front and rear ratio gear
ditto
ditto
ditto
?
Reducer
?
?
40 machine oil
*Replace and clean the interior after 100 hours of refueling operation, and replace every half a year later

Physical drawing display of rubber mixing machine







Update time: 2020 / 2 / 29 8:20:15

label: Usage of rubber mixing machine ???

i want inquiry
  • Purchase products: *
  • Your organization: *
  • Your name: *
  • contact number: *
  • Detailed address:
  • Common email address:
  • Postscript to order: *
  • Verification information: *
  •  Send a message Reset
similar Related products
relevant article
Company homepage | Company profile | Product display | Company news | Technical literature | Data download | Procurement consultation | contact us | Sales network

Address: Jiangdu City, Jiangsu Province Tel: 0514-86274960 Fax: 0514-86278868 email: Send e-mail to exhibitors Online ? ? ICP record No Su ICP Bei 14038976-2

Copyright@2014-2017 Yangzhou Yuanfeng test Machinery Factory All rights reserverd technical support: A Yi net ? ? Manage login

Yuanfeng Wangwang Source peak
thirteen billion three hundred and ninety million six hundred and forty thousand eight hundred and nine 05146274960
Customer service time: (7:30-17:00)
A Yi net The website is recommended for collection